Skype Me™!



Disposers

A food waste disposer is a simply must-have appliance for the modern kitchen. A waste disposer from InSinkErator doesn’t just offer practical, contemporary convenience; it provides an environmentally responsible answer to the growing problem of food waste.

This is the easy way to deal with food waste disposals. Fitted easily and discreetly under the sink, a waste disposer effortlessly grinds food waste into tiny particles that are automatically flushed away down a standard kitchen drain into the local waste treatment system or a septic tank.

Simply turn on your cold tap, put the food scraps into your sink and feed them into the InSinkErator flange that replaces your normal plughole. Turn on the food waste disposer and at the touch of a button the food waste is ground down and flushed away, quickly quietly and efficiently.

Just about any food waste you can think of – including meat bones – is dealt with by the waste disposer in seconds. The Evolution 200 can deal with ALL food waste disposals.

Safety isn’t a problem – the grind ring that does the work so efficiently is safe and there are no blades.

You clean up on every level. You save time dealing with messy, smelly food waste. You save the hassle of filling and emptying pedal bins and dustbins. And you do your bit for the environment. With its unobtrusive, compact design, a food waste disposer is installed easily and can be fitted to most sinks. All that’s needed is standard plumbing and a power source nearby!

############################levo##############################

DOMESTIC GARBAGE DISPOSER
MIO Z 104

The garbage disposer Model MIO Z 104 is conceived for domestic purposes: essential at home, but useful also for caravans, canteens, health centres and many other places.
It is easy to use: just turn on cold water and switch on the disposer. Inserting all food leftovers in the hole of the sink, MIO Z 104 will rapidly and entirely erase them, grinding them in micrometric fragments, that will be drained easily through the generic sewage pipe.

What does it dispose of?
MIO Z 104 allows the disposal of all the organic waste of kitchens: chicken and steak bones, fish bones and shells, every kind of peel, vegetables, fruits, leaves of vegetables, fruit stones, nut and egg shells, glass, etc.
It does not dispose of:
Metal works (cans, cutlery, etc.), rubber, elastic fibres (rags, ropes, plastic bags, etc.). The installation is simple: the only essential condition is the possibility to insert a rammer of 2” or 3” in the sink.
The disposer MIO Z 104 may be easily installed on metal or ceramic sinks made up by one or two basins.

DESCRIPTION

Technical data:
  • Crusher set of 0.5 HP standard
  • Single-phase motor 220V / 50 HZ / O,5 HP
  • Crusher components in alloy and high standard of carbon and nickelchrome;
  • Revolutions per minute: 1450
  • Current: 3,5 A
  • Switch controls with heat protection
Equipped with:
  • Rammer of 2” or 3” for stainless steel sinks or of 2” for ceramic sinks
  • Special siphon in moplen with connector for the exhaust pipe of the dishwasher
Colour:
  • ochre ( mass-produced )
Size:
  • Diameter: 185 mm
  • Height: 370 mm

############################desno#############################

DOMESTIC GARBAGE DISPOSER
Z 105

The garbage disposer Model Z 105 is conceived for domestic purposes: essential at home, but useful also for caravans, canteens, health centres and many other places.
It is easy to use: just turn on cold water and switch on the disposer. Inserting all food leftovers in the hole of the sink, Z 105 will rapidly and entirely erase them, grinding them in micrometric fragments, that will be drained easily through the generic sewage pipe.

What does it dispose of?
Z 105 allows the disposal of all the organic waste of kitchens: chicken and steak bones, fish bones and shells, every kind of peel, vegetables, fruits, leaves of vegetables, fruit stones, nut and egg shells, glass, etc.
It does not dispose of:
Metal works (cans, cutlery, etc.), rubber, elastic fibres (rags, ropes, plastic bags, etc.).
The installation is simple: the only essential condition is the possibility to insert a rammer of 2” or 3” in the sink. The disposer Z 105 may be easily installed on metal or ceramic sinks made up by one or two basins.

DESCRIPTION

Technical data:
  • Crusher set of 1/2 HP
  • Single-phase motor 220V - 50 HZ - 1/2 HP
  • Crusher components in alloy and high standard of carbon and nickelchrome
  • Revolutions per minute: 1450
  • Current: 3,5 A
  • Motor protector
  • Exhaust diameter: 40 mm
  • Net weight: 15 kg
Equipped with:
  • Rammer of 2” or 3” for stainless steel sinks or of 2” for ceramic sinks
  • Special siphon in moplen with connector for the exhaust pipe of the dishwasher
  • Service key for the manual unblocking
  • Electric plant with converter
  • Locking and unlocking levers
Colour:
  • Royal blue (mass - produced)
  • Available in other colours by request (with extra charge)
Size:
  • A: 170 mm
  • B: 190 mm
  • C: 360 mm
  • D: 92,5 mm
  • E: 89 mm

############################levo##############################

DOMESTIC GARBAGE DISPOSER
WITH PUMP EFFECT
Z 105/P

The garbage disposer Model Z 105/P is conceived for domestic purposes: essential at home, but useful also for caravans, canteens, health centres and many other places.
Thanks to its pump effect, this disposer is also ideal for basements, motor and sailing boats and wherever is needed a stronger thrust for the disposal of the crushed waste.
It is easy to use: just turn on cold water and switch on the disposer. Inserting all food leftovers in the hole of the sink, Z 105/P will rapidly and entirely erase them, grinding them in micrometric fragments, that will be drained easily through the generic sewage pipe.

What does it dispose of?
Z 105/P allows the disposal of all the organic waste of kitchens: chicken and steak bones, fish bones and shells, every kind of peel, vegetables, fruits, leaves of vegetables, fruit stones, nut and egg shells, glass, etc.
It does not dispose of:
Metal works (cans, cutlery, etc.), rubber, elastic fibres (rags, ropes, plastic bags, etc.).
The installation is simple: the only essential condition is the possibility to insert a rammer
of 2” or 3” in the sink. The disposer Z 105/P may be easily installed on metal or ceramic sinks made up by one or two basins.

DESCRIPTION

Technical data:
  • Crusher set with pump effect of 1/2 HP
  • Single-phase motor 220V - 50 HZ - 1/2 HP
  • Crusher components in alloy and high standard of carbon and nickelchrome
  • Revolutions per minute: 1450
  • Current: 3.5 A
  • Motor protector
  • Exhaust diameter: 40 mm
  • Net weight: 15 kg
  • Discharge head: 2,5 mt H2O
Equipped with:
  • Rammer of 2” or 3” for stainless steel sinks or of 2” for ceramic sinks
  • Special siphon in moplen with connector for the exhaust pipe of the dishwasher
  • Service key for the manual unblocking
  • Electric plant with converter
  • Locking and unlocking levers
Colour:
  • Royal blue (mass - produced)
  • Available in other colours by request (with extra charge)
Size:
  • A: 170 mm
  • B: 190 mm
  • C: 360 mm
  • D: 92,5 mm
  • E: 89 mm

############################desno#############################

DISPOSER FOR SMALL COMMUNITIES
Z 106

The garbage disposer Model Z 106 is conceived for community purposes like: fish markets, fruit and vegetable markets, canteens, restaurants and especially small and medium-sized boats. The disposer Z 106 guarantees perfect results also in extreme conditions, and can be provided or not with a stainless-steel container.
Z 106 allows, by breaking up the materials into micrometric parts, the disposal of: chicken and steak bones, fish bones and shells, vegetables, fruits, every kind of peel, leaves of vegetables, fruit stones, nut and egg shells, biodegradable paper, glass, etc. This disposer crushes the wastes avoiding their stagnation and putrefaction.
The installation is simple: the only essential condition is the possibility to insert a rammer of 2” or 3” (supplied with the disposer) in the sink. The disposer Z 106 may be easily installed on metal or ceramic sinks made up by one or two basins.

DESCRIPTION

Technical data:
  • Crusher set 1.5 HP
  • Three-phase motor 220-380 V - 50 HZ - 1.5 HP
  • Crusher components in alloy and high standard of carbon and nickelchrome
  • Revolutions per minute: 1400 (2800 optional)
  • Starting Current: 7 A with EC standards
  • Motor protector
  • Exhaust diameter: 40 mm
  • Disposal capacity: 50 - 70 kg/h
  • Net weight: 16 Kg
Equipped with:
  • Rammer of 2” or 3” for stainless steel sinks or of 2” for ceramic sinks
  • Special siphon in moplen with connector for the exhaust pipe of the dishwasher
  • Service key for the manual unblocking
  • Electric plant with converter
  • Locking and unlocking levers
Colour:
  • Royal blue (mass - produced)
Size:
  • A: 170 mm
  • B: 190 mm
  • C: 445 mm
  • D: 92,5 mm
  • E: 89 mm

############################levo##############################

DISPOSER FOR SMALL COMMUNITIES
WITH PUMP EFFECT
Z 106/P

The garbage disposer Model Z 106/P is conceived for community purposes like: fish markets, fruit and vegetable markets, canteens, restaurants small and medium-sized boats and wherever is needed a stronger thrust for the disposal of the crushed waste. The disposer Z 106/P guarantees perfect results also in extreme conditions, and can be provided or not with a stainless-steel container.
Z 106 allows, by breaking up the materials into micrometric parts, the disposal of: chicken and steak bones, fish bones and shells, vegetables, fruits, every kind of peel, leaves of vegetables, fruit stones, nut and egg shells, biodegradable paper, glass, etc. This disposer crushes the wastes avoiding their stagnation and putrefaction.
The installation is simple: the only essential condition is the possibility to insert a rammer of 2” or 3” (supplied with the disposer) in the sink. The disposer Z 106 may be easily installed on metal or ceramic sinks made up by one or two basins.

DESCRIPTION

Technical data:
  • Crusher set with pump effect 1.5 HP
  • Three - phase motor 220 - 380 V - 50 HZ - 1.5 HP
  • Crusher components in alloy and high standard of carbon and nickelchrome
  • Revolutions per minute: 1400
  • Starting Current: 7 A with EC standards
  • Motor protector
  • Exhaust diameter: 40 mm
  • Disposal capacity: 50 - 70 kg/h
  • Net weight: 17 kg
  • Discharge head 2.5 mt H2O
Equipped with:
  • Rammer of 2” or 3” for stainless steel sinks or of 2” for ceramic sinks
  • Special siphon in moplen with connector for the exhaust pipe of the dishwasher
  • Service key for the manual unblocking
  • Electric plant with converter
  • Locking and unlocking levers
Colour:
  • Royal blue (mass - produced)
Size:
  • A: 170 mm
  • B: 190 mm
  • C: 445 mm
  • D: 92,5 mm
  • E: 89 mm

############################desno#############################

DISPOSER FOR SMALL COMMUNITIES
Z 106 INOX

The garbage disposer Model Z 106 INOX is conceived for community purposes like: fish markets, fruit and vegetable markets, canteens, restaurants and especially small-sized boats. The disposer Z 106 INOX guarantees perfect results also in extreme conditions, and is provided in a stainless-steel container and is equipped with a conical basin with a waste-hole entrance of 90 Ø mm.
Z 106 INOX allows, by breaking up the materials into micrometric parts, the disposal of: chicken and steak bones, fish bones and shells, vegetables, fruits, every kind of peel, leaves of vegetables, fruit stones, nut and egg shells, biodegradable paper, glass, etc. This disposer crushes the wastes avoiding their stagnation and putrefaction.

DESCRIPTION

Technical data:
  • Crusher set 1.5 HP
  • Three-phase motor 220-380 V - 50 HZ - 1.5 HP with heat protection
  • Crusher components in alloy and high standard of carbon and nickelchrome
  • Revolutions per minute: 2800
  • Starting Current: 7 A with EC standards
  • Ancillary controls 24V for reverse with heat protection
  • Switch buttons (reverse, stop, forward)
  • Low voltage switchboard
  • Exhaust diameter: 40 mm
  • Hydraulic system that starts with water input
  • Disposal capacity: 50 - 70 kg/h
Equipped with:
  • Stainless-steel container A.1.S.1.304 with round basin
  • Stainless-steel structural frame A.1.S.1.304 to fit the disposer set
  • Flexible metal hose of 120 cm of ¾” (for the link with the water channel)
  • Special siphon in moplen
  • Service key for the manual unblocking
Size:
  • Height: 850 mm
  • Width: 440 mm
  • Depth: 560 mm
  • Weight: 45 kg

############################levo##############################

DISPOSER FOR SMALL COMMUNITIES
Z 106 INOX SPECIAL

The garbage disposer Model Z 106 INOX SPECIAL is conceived for community purposes like: fish markets, fruit and vegetable markets, canteens, restaurants and especially smallsized boats. The disposer Z 106 INOX SPECIAL guarantees perfect results also in extreme conditions, and is provided in a stainless-steel container equipped with a rectangular basin provided of a safety system inside the hopper.
Z 106 INOX SPECIAL allows, by breaking up the materials into micrometric parts, the disposal of: chicken and steak bones, fish bones and shells, vegetables, fruits, every kind of peel, leaves of vegetables, fruit stones, nut and egg shells, biodegradable paper, glass, etc. This disposer crushes the wastes avoiding their stagnation and putrefaction.

DESCRIPTION

Technical data:
  • Crusher set 1.5 HP
  • Three-phase motor 220-380 V - 50 HZ - 1.5 HP with heat protection
  • Crusher components in alloy and high standard of carbon and nickelchrome;
  • Revolutions per minute: 2800;
  • Starting Current: 7 A with EC standards
  • Ancillary controls 24V for reverse with heat protection
  • Switch buttons (reverse, stop, forward)
  • Low voltage switchboard
  • Exhaust diameter: 40 mm
  • Hydraulic system that starts with water input
  • Disposal capacity: 50 - 70 kg/h
Equipped with:
  • Stainless-steel container A.1.S.1.304
  • Stainless-steel structural frame A.1.S.1.304 to fit the disposer set
  • Safety System inside the hopper for the prevention of accidents
  • Flexible metal hose of 120 cm of ¾” (for the link with the water channel)
  • Special siphon in moplen
  • Service key for the manual unblocking
Size:
  • Height: 850 mm
  • Width: 400 mm
  • Depth: 700 mm
  • Weight: 55 kg

############################desno#############################

DISPOSER FOR COMMUNITIES
T 300

The garbage disposer Model T 300 is conceived for community purposes like: fish markets, fruit and vegetable markets, canteens and restaurants. The disposer T 300 is provided in a stainless-steel container and is equipped with a rectangular basin provided of a safety system inside the hopper.
Even though the T 300 is one of the most economic machines of its category, owns characteristics that make of it a proper ‘mill’ for food waste. It crushes through specially treated steel hammers and is equipped with a double ring system that makes the activity totally watertight and keeps safe the space around the motor. Its rigid and compact structure guarantees an efficient employment of long duration.

DESCRIPTION

Technical data:
  • Crusher set 3 HP
  • Three-phase motor 220-380 V - 50 HZ - 3 HP with heat protection
  • Crusher components in alloy and high standard of carbon and nickelchrome
  • Starting Current: with EC 6 - 4 A standards
  • Ancillary controls 24V for reverse with heat protection
  • Switch buttons (reverse, stop, forward)
  • Low voltage switchboard
  • Exhaust diameter: 60 mm
  • Hydraulic system that starts with water input
  • Disposal capacity: 100 - 150 kg/h
Equipped with:
  • Stainless-steel container A.1.S.1.304
  • Stainless-steel structural frame A.1.S.1.304 to fit the disposer set
  • Safety System inside the hopper for the prevention of accidents
  • Flexible metal hose of 120 cm of ¾” (for the link with the water channel)
Size:
  • - Height: 850 mm;
  • - Width: 400 mm;
  • - Depth: 700 mm;
  • - Weight: 120 kg.

############################levo##############################

DISPOSER FOR COMMUNITIES
T 421
Garbage disposer with simple milling process

The garbage disposer Model T 421 is conceived for community purposes like: fish markets, fruit and vegetable markets, canteens and restaurants.
This model works through a simple milling process with ‘pump effect’: it crushes the waste and then expels the wastewater like a centrifugal pump. T 421 crushes through specially treated steel hammers and is equipped with a double ring system that makes the activity totally watertight and keeps safe the space around the motor. Its rigid and compact structure guarantees an efficient employment of long duration.

DESCRIPTION

Technical data:
  • Crusher set 4 HP
  • Three-phase motor 220-380 V - 50 HZ - 4 HP
  • Crusher components in alloy and high standard of carbon and nickelchrome
  • Starting Current: with EC standards 10 - 6 A;
  • Low voltage external controls 24V (optional)
  • Waste input opening: 110 mm
  • Discharge capacity: 1 mc/h a H=1,5 mt
  • Disposal capacity: 220 - 250 kg/h
  • Electric plant with switch buttons, reverse controls (reverse, stop, forward) and heat protection
  • Exhaust diameter: 3” internally threaded 1” ½”, externally threaded 2”
Equipped with:
  • Three-legged support (without container and without hydraulic channel)
Size:
  • Height: 632 mm
  • Diameter: 327 mm
  • Weight: 90 kg

############################desno#############################

DISPOSER FOR COMMUNITIES
T 402
Garbage disposer with simple milling process

The garbage disposer Model T 402 is conceived for community purposes like: fish markets, fruit and vegetable markets, canteens and restaurants. This model works through a simple milling process belt-based with ‘pump effect’: it crushes the waste and then expels the wastewater like a centrifugal pump.
T 402 crushes through specially treated steel hammers and is equipped with a double ring system that makes the activity totally watertight and keeps safe the space around the motor. Its rigid and compact structure guarantees an efficient employment of long duration.

DESCRIPTION

Technical data:
  • Crusher set 4 HP with transmission belts
  • Three-phase motor 220-380 V - 50 HZ - 4 HP
  • Crusher components in alloy and high standard of carbon and nickelchrome
  • Starting Current: with EC standards 6 - 4 A
  • Low voltage external controls 24V
  • Hydraulic circuit starting with water input
  • Disposal capacity: 220 - 250 kg/h
  • Switch buttons (reverse, stop, forward) with heat protection
  • Exhaust diameter: 3”, internally threaded
Equipped with:
  • Carinate in stainless-steel A.1.S.1.304
  • Stainless-steel structural frame A.1.S.1.304 to fit the disposer set
  • Basin with Safety System for the prevention of accidents
  • Flexible metal hose of 120 cm of ¾” (for the link with the water channel)
Size:
  • Height: 850 mm
  • Width: 400 mm
  • Depth: 700 mm
  • Weight: 130 kg

############################levo##############################

DISPOSER FOR COMMUNITIES
T 402 MT
Garbage disposer with simple milling process

The garbage disposer Model T 402 MT is conceived for community purposes like: fish markets, fruit and vegetable markets, canteens and restaurants. This model works through a simple milling process belt-based with ‘pump effect’: it crushes the waste and then expels the wastewater like a centrifugal pump. Even though the T 402 MT is one of the most economic machines of its category, owns characteristics that make of it a proper ‘mill’ for food waste.
T 402 MT is placed in a stainless-steel container bigger than the one of the model T 402, and has a wider worktop. This disposer crushes through specially treated steel hammers and is equipped with a double ring system that makes the activity totally watertight and keeps safe the space around the motor. Its rigid and compact structure guarantees an efficient employment of long duration.

DESCRIPTION

Technical data:
  • Crusher set 4 HP with transmission belts
  • Three-phase motor 220-380 V - 50 HZ - 4 HP
  • Crusher components in alloy and high standard of carbon and nickelchrome
  • Starting Current: with EC standards 10 - 6 A
  • Low voltage external controls 24V (optional)
  • Hydraulic circuit starting with water input
  • Switch buttons (reverse, stop, forward) with heat protection
  • Exhaust diameter: 3” internally threaded 1” ½”, externally threaded 2”
  • Disposal capacity: 220-250 kg/h
Equipped with:
  • Structure in stainless-steel A.1.S.1.304
  • Stainless-steel structural frame A.1.S.1.304 to fit the disposer set
  • Basin with Safety System for the prevention of accidents
  • Flexible metal hose of 120 cm of ¾” (for the link with the water channel)
Size:
  • Height: 850 mm
  • Width: 700 mm
  • Depth: 700 mm
  • Weight: 140 kg

############################desno#############################

PRE-WASHING FOR DISHWASHERS
T 421 SPECIAL
Garbage disposer with simple milling process

The garbage disposer Model T 421 SPECIAL is conceived for large community purposes like: fish markets, fruit and vegetable markets, canteens, restaurants and especially in industrial dishwashing plants. This model works through a simple crushing process with ‘pump effect’: it crushes the waste and then expels the wastewater like a centrifugal pump.
T 421 SPECIAL is supplied within a stainless-steel container with an inclined top equipped with sliding tracks. T 421 SPECIAL needs to be installed before the plant of the industrial dishwashers. This disposer crushes through specially treated steel hammers, works as pre-washing system and is equipped with a double ring system that makes the activity totally watertight and keeps safe the space around the motor. Its rigid and compact structure guarantees an efficient employment of long duration.

DESCRIPTION

Technical data:
  • Crusher set 4 HP
  • Three-phase motor 220-380 V - 50 HZ - 4 HP
  • Crusher components in alloy and high standard of carbon and nickelchrome
  • Starting Current: with EC standards 10 - 6 A
  • Low voltage external controls 24V
  • Switch buttons (reverse, stop, forward) with heat protection
  • Exhaust diameter: 3” internally threaded 1” ½”, externally threaded 2”
  • Discharge capacity: 1mc/h a H=1,5 mt
  • Pre-washing serve-controlled spray system at the start with guidelines
  • Disposal capacity: 220 - 250 kg/h
Equipped with:
  • Stainless-steel unit
  • Stainless-steel structural frame A.1.S.1.304 to fit the disposer set
  • Safety System inside the hopper for the prevention of accidents (continuous cycle)
Size:
  • Height: 1800 mm
  • Height of worktop: 850 mm
  • Length: 2270 mm
  • Width: 775 mm
  • Depth: 700 mm
  • Weight: 110 kg

############################levo##############################

WORK TABLE
KOMBI 2000
with waste-crushing disposer

The Worktable KOMBI 2000 is a complete worktop equipped with a set of two disposer inside, that allow the disposal of meat, fish and vegetables. It owns a mixer faucet set of industrial shower type and a sink-basin with an upper washing grid.
The two disposers placed inside are:

  • Garbage disposer mod. T 300 with crusher set of 3.0 HP
  • Garbage disposer mod. Z 106 with crusher set of 1.5 HP (installed in the plughole)

DESCRIPTION

Technical data:
  • Total power of the crusher set 4,5 HP;
  • Three-phase motor 220 - 380 V - 50 HZ;
  • Starting Current: with EC standards 10 - 8 A
  • Low voltage external controls 24V in a IP55 box
  • Electric watertight display IP55
  • Water consumption: 150 lt/h
  • Disposal capacity: 100 - 150 kg/h
  • Revolutions per minute: 1400
  • Diameter of input opening: ¾”
  • Switch buttons (reverse, stop, forward)
  • Exhaust diameter: 60 mm (40 mm Z106)
  • Safety System inside the hopper for the prevention of accidents (continuous cycle).
Equipped with:
  • Worktop and basin in stainless-steel a.1.S.1.304
Size:
  • Height: 850 mm
  • Length: 1600 mm
  • Width: 750 mm
  • Depth: 700
  • Weight: 160 kg
  • Gross Weight with packaging: 180 kg

############################desno#############################

DISPOSER FOR COMMUNITIES
B 501
Double-milling process crushing-waste disposer

The garbage disposer Model B 501 is conceived for large community purposes like hotels, restaurants and hospitals.
B 501 crushes in two stages: firstly through a group of tempered-steel small pillars and hammers, and then there is the refining crushing. B 501 owns an original mechanical configuration that differentiates it from all the other machinery available on the market, because the motor is linked with the rotating components of the disposer through a set of belts, forming a cushioning element that is very useful for situations in which too big or too hard objects are introduced in the structure.

DESCRIPTION

Technical data:
  • Crusher set of 5,5 HP with transmission belts
  • Three-phase motor 220-380 V - 50 HZ - 5,5 HP
  • Crusher components in alloy and high standard of carbon and nickelchrome
  • Starting Current: with EC standards 16 - 10 A
  • Hydraulic circuit starting with water input
  • Ancillary controls (24V) with Switch buttons (reverse, stop, forward) with heat protection
  • Exhaust diameter: 3”
  • Disposal capacity: 300 - 400 kg/h
Equipped with:
  • Structure in stainless-steel A.1.S.1.304
  • Stainless-steel structural frame A.1.S.1.304 to fit the disposer set
  • Basin with Safety System for the prevention of accidents (continuous cycle)
  • Flexible metal hose of 120 cm of ¾” (for the link with the water channel)
Size:
  • Height: 850 mm
  • Width: 400 mm
  • Depth: 700 mm
  • Weight: 230 kg

############################levo##############################

DISPOSER FOR COMMUNITIES
B 701
Double-milling process crushing-waste disposer

The garbage disposer Model B 701 is conceived for large community purposes like hotels, restaurants and hospitals.
B 701 crushes in two stages: firstly through a group of tempered-steel small pillars and hammers, and then there is the refining crushing. B 701 owns an original mechanical configuration that differentiates it from all the other machinery available on the market, because the motor is linked with the rotating components of the disposer through a set of belts, forming a cushioning element that is very useful for situations in which too big or too hard objects are introduced in the structure.

DESCRIPTION

Technical data:
  • Crusher set of 7,5 HP with transmission belts
  • Three-phase motor 220-380 V - 50 HZ - 7,5 HP
  • Crusher components in alloy and high standard of carbon and nickelchrome
  • Starting Current: with EC standards 21 - 12 A
  • Hydraulic circuit starting with water input
  • Ancillary controls (24V) with Switch buttons (reverse, stop, forward) with heat protection
  • Watertight display 1P 55
  • Exhaust diameter: 3”
  • Disposal capacity: 400 - 600 kg/h
Equipped with:
  • Structure in stainless-steel and nickelchrome
  • Iron structural frame to fit the disposer set
  • Flexible metal hose of 120 cm of ¾” (for the link with the water channel)
Size:
  • Height: 850 mm
  • Width: 700 mm
  • Depth: 700 mm
  • Weight: 330 kg

############################desno#############################

CRUSHING DISPOSER FOR GLASS BOTTLES
ARCHIMEDE

The crushing disposer Model ARCHIMEDE is for the crushing of glass bottles and glass containers, in order to reduce their volume.

DESCRIPTION

Technical data:
  • Stainless-steel crusher set of 1.5 HP;
  • Three-phase or motor 220-380 V - 50 HZ - 1.5 HP
  • Starting Current: with EC standards 4 - 2,4 A
  • Hydraulic circuit with electro-valve and automatic input
  • Ancillary controls (24V) with Switch buttons (reverse, stop, forward) with heat protection
  • Exhaust diameter: 40 mm
  • Disposal capacity: 70 - 100 kg/h
Equipped with:
  • Stainless-steel container A.1.S.1.304
  • Stainless-steel structural frame A.1.S.1.304 to fit the disposer set
  • Safety system in the hopper for the prevention of accidents
  • Flexible metal hose of 120 cm of ¾” (for the link with the water channel)
  • Special siphon in moplen
  • Service key for the manual unblocking
Size:
  • Height: 1050 mm
  • Width: 400 mm
  • Depth: 800 mm
  • Weight: 100 kg

Disposer accessories

############################levo##############################

GARBAGE DISPOSAL AIR SWITCH

Equipped with:
  • AIR SWITCH
  • AIR PIPE
  • ELECTRICAL PLANT FOR DEVICES UP TO 0,5 HP - 220 V

Optional accessories

Besides the wide range of machinery proposed, we offer also a large number of accessories available by request, in order to improve the activities of the equipments and ease their use.

############################levo##############################

Automatic device intercepting cutlery and iron materials

This device is applicable to the following models:

  • Z 106 INOX SPECIAL
  • T 300
  • T 401
  • T 402
  • B 501
  • B701
  • T 421 SPECIAL
  • PULPER BIG 501
  • PULPER BIG 501 MILLENIUM
  • PULPER BIG 701
  • PULPER BIG 701 MILLENIUM

############################desno#############################

Piletta Ø 240 - Rammer Ø 240

This Rammer group of Ø 240 is made of stainless-steel A.1.S.1. 304, equipped with a safety system and with hydraulic circuit adaptable to a disposal table in place of the plughole.

This device is applicable to the following models:
  • T 421
  • Z 106
  • T 300 (Without Structure)
Size:
  • D: 290 mm
  • L: 270 mm